WM-INOWAX
- Bonded crosslinked polyethylene glycol (PEG)
- General stationary phase with polarity
- Thermal stability is up to 280℃
- Chemically bonded crosslinked columns can be flushed with solvent
- Polarity is similar to stationary phases of HP-INNOWax, CP-WAX 52CB
- Comply with USP G16 specific stationary liquid
Ordering Information
| P/N | Specification | P/N | Specification |
| 03909-80018 | WM-INOWAX 10m×0.18mm×0.18μm | 03909-24002 | WM-INOWAX 60m×0.25mm×0.5μm |
| 03909-89018 | WM-INOWAX 20m×0.18mm×0.18μm | 03909-31001 | WM-INOWAX 15m×0.32mm×0.25μm |
| 03909-18011 | WM-INOWAX 25m×0.20mm×0.2μm | 03909-31002 | WM-INOWAX 15m×0.32mm×0.5μm |
| 03909-18022 | WM-INOWAX 25m×0.20mm×0.4μm | 03909-32008 | WM-INOWAX 30m×0.32mm×0.15μm |
| 03909-13011 | WM-INOWAX 50m×0.20mm×0.2μm | 03909-32001 | WM-INOWAX 30m×0.32mm×0.25μm |
| 03909-13022 | WM-INOWAX 50m×0.20mm×0.4μm | 03909-32002 | WM-INOWAX 30m×0.32mm×0.5μm |
| 03909-21001 | WM-INOWAX 15m×0.25mm×0.25μm | 03909-32003 | WM-INOWAX 30m×0.32mm×1.0μm |
| 03909-21002 | WM-INOWAX 15m×0.25mm×0.5μm | 03909-34008 | WM-INOWAX 60m×0.32mm×0.15μm |
| 03909-22008 | WM-INOWAX 30m×0.25mm×0.15μm | 03909-52003 | WM-INOWAX 30m×0.53mm×1.0μm |
| 03909-22001 | WM-INOWAX 30m×0.25mm×0.25μm | 03909-54002 | WM-INOWAX 60m×0.53mm×0.5μm |
| 03909-22002 | WM-INOWAX 30m×0.25mm×0.5μm | 05909-53005 | WM-INOWAX 50m×0.53mm×2.0μm |
| 03909-24008 | WM-INOWAX 60m×0.25mm×0.15μm | 05909-22001 | WM-INOWAX 30m×0.25mm×0.25μm |
| 03909-24001 | WM-INOWAX 60m×0.25mm×0.25μm |
